UFS Self Levelling Pins (100 Pack) With 3M Self Adhesive Base - UFS7540

UFS7540 Levelling Pins Packet of 100 Level Pegs with 3M Self Adhesive Base

Are you looking for self-leveling pins and level pegs with adhesive for your flooring jobs?

These really help save time when getting height levels right for the installation of the self-leveling underlayment.

The speed of your cementitious pour is optimized when using the UFS leveling pins.

UFS7540 Levelling Pins are a helpful and cheap consumable that makes it easy to measure self-leveling underlay just poured. 

Once the material is poured to the top of the pins it will blend in seamlessly with the material. 

• 3M Industrial Adhesive strip holds the level pegs securely in place on a dust-free substrates during installation
• Returns to its original upright position if stepped on or rolled over
• Bright Yellow makes them easily seen
• Easy to read Metric millimeter scale for greater accuracy
• Marked up to 100mm
• Easy to cut plastic
• Designed for professional contractors
• Sold per packet of 100

Level Pegs used to create a level floor, like so:

For a standard pour

• Sweep/vacuum
• Prep and prime the subfloor
• Cut Pegs at the required height,
• Place the leveling pins/pegs in as many places as necessary
• Pour underlayment
• Once the material is poured to the top of the pins, the pins will blend in seamlessly with the material – no removing of the pins required

Measure materials when surfaces are inconsistent and uneven:

• Sweep/vacuum
• Prep and prime the subfloor
• Use a laser or similar method to grid the floor and determine the highest point in the room.
• Start working from this point.
• Using the laser to measure the points on the floor to build the floor up to the required height, marking the floor using a pencil (Please note paint markers and marker pens can bleed through to the top covering),
• Cut the peg to the heights just marked on the floor using the laser
• Pour underlay
• Once the material is poured to the top of the pins, the pins will blend in seamlessly with the material – no removing of the pins required