Wagner C555 Concrete Moisture Meter Kit at Kevmor

Wagner C555 Concrete Moisture Meter Kit at Kevmor

The new Wagner C555 Concrete Moisture Meter Kit will guarantee you to measure your concrete, smooth or firm, quickly and with no damage before placing Rapid RH® L6 Smart Sensors.

It includes both built-in ambient sensors and On-Demand Calibrator, which is everything needed to perform the test outlined in ASTM F2659.

Use the C555 in Relative Measurement (REL) mode to receive a comparative indication of moisture in materials other than concrete using a scale from 1 to 100.

When to Use a C555 Concrete Moisture Meter

• Use the C555 to find wet spots or potential problem areas in concrete
• Use a C555 after a moisture-related incident

If a leak, high humidity levels, or recent flooding have you questioning whether that old slab is saturated at or near the surface, the C555 will tell you pretty quickly. Simply measure a section of concrete that wasn’t affected by the situation, then measure sections of the concrete slab, moving closer and closer to the suspect area to get a better map of the scope and intensity of the moisture intrusion into the concrete slab.

Use a C555 to qualitatively measure the moisture situation of other materials:

• Brick
• Cement
• Gypsum

Use a C555 to monitor ambient temperature and relative humidity.

What the meter includes:

• ASTM F2659 compliant
• Digital display
• Measures to 0.5-inch depth
• Integrated ambient temperature and RH sensors
• Moisture scale reads from 0% to 6.9%
• Audio threshold alarm
• In Relative mode can be used on other concrete-similar materials such as concrete block, brick, cement & gypsum.
• A scuff-resistant Teflon sensor pad
• Enjoy a 1-year warranty

You will find in the kit:

• C555 Concrete Moisture Meter
• Paired On-Demand Calibration Plate
• Rubber Protective Boot
• Foam-lined ABS Plastic Carrying Case
• 9V Battery
• Instruction Manual