Ardex Waterproofing WPM 002
search
  • Ardex Waterproofing WPM 002

Ardex Waterproofing WPM 002

Ardex Waterproofing WPM 002 - 40kg kit

Fast-drying two-part waterproofing membrane for tile applications. Formulated with advanced acrylic polymers that prevent re-emulsification. Typically ready for tiling within 16-24 hours. It pairs seamlessly with ARDEX tile adhesives and features fiber reinforcement, eliminating the need for additional reinforcing mat.

WATWPM2A20_10595
New product
Available in
Available instore or CALL 1300 KEVMOR
  • All Products in Stock in Australia
  • Free Shipping for online orders over $100 Aust wide*

Ardex Waterproofing WPM 002 - 40kg kit

  • A rapid drying, two-part waterproofing membrane specially designed for use under tiles
  • Advanced acrylic polymers – will not re-emulsify
  • Rapid drying time, normally ready to tile in 16-24 hours
  • Class III two-component cementitious membrane that conforms to AS4858:2004 Wet Area Membrane (Ref: CSIRO Report 3879)
  • Compatible with ARDEX tile adhesives
  • Fibre-reinforced – no need for reinforcing mat
  • Low VOC content – meets Green Building Council of Australia Green Star IEQ-13 requirements
Substrates:
  • Concrete, renders and screeds
  • Wet area compatible fibre-cement sheet, plywood and plasterboard
Location:

Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic. Suitable for permanent immersion

Surfaces:

  • Floors
  • Walls

Colours:

  • Liquid – White
  • Powder – Off white

Coverage:

  • 40kg unit covers approx. 16m2 to 24m2 (2 coats)
  • Floors 16m² (2 coats) D.F.T. – 1.2mm
  • Walls 24m² (2 coats) D.F.T. – 0.8mm

Drying Times:

  • Recoat time: 1-2 hrs
  • Ready to tile: 16-24 hrs
  • Full cure: 3 days

VOC content:

  • 25g/L

You might also like