Janser Bevelling Tool/Trimmer Edge PVC - 25 degrees Bevel - 6591
Janser Bevelling Tool/Trimmer Edge PVC - 25 degrees Bevel - 6591
- The tool creates a 25-degree bevel on L.V.T planks, tiles, and other materials
- Designed to restore the manufacturer's bevel after cutting into Amtico, Kardeen, or LVT tiles or planks
- Easily recreates the factory bevelled edge on vinyl planks and tiles
Janser Bevelling Tool/Trimmer Edge PVC - 25 degrees Bevel - 6591
This tool puts a 25 degree bevel on L.V.T planks, tiles and various other materials
Once you have made a cut into your Amtico/Kardeen /LVT tile or plank, this tool is for cutting the manufacturers bevel back onto the edge of the tile.
Easily recreate factory bevelled edge on vinyl planks and tiles.
BEVELLING EDGE TRIMMER
For the production of a 25 degree mitre at PVC edges
Instructions for Use
FUNCTIONING
- The tool cuts a bevelled edge of 25˚ on vinyl planks, tiles and designer floorings
- Thus you reproduce a bevelled edge after cutting a floor
- The cutter is adaptable to any type of tool
ADJUSTMENTS
Flooring Height - the height guide is used for fast cutting or for cutting with the flooring already laid into the adhesive
Blade – the adjustment screw sets the width of the bevelled edge. The fixing screw holds the blade on the fixed position
PLEASE NOTE – the blade is factory pre-set. Check the cut before starting work. Do not tighten the fixing screw too much, this might deform the tool.
Similar product: Amtico Bevel Tool