Mapei Ultrabond Eco V4 Evolution Resilient Adhesive

Mapei Ultrabond Eco V4 Evolution Resilient Adhesive

“All in one” universal adhesive with strong, rapid initial tack and long open time for resilient and textile floor and wall-coverings.

Where to use:

High-performance adhesive in water dispersion, specific for PVC, LVT and rubber flooring in commercial project as well as universal adhesive for all common floor covering types.

Particularly suitable for the installation of modular LVT.

For use on floors and walls in interior applications.

Suitable as wet-bed adhesive on: – level, absorbent surfaces; – underfloor heating systems. It can be used for: – static and dynamic loads, including intense loads, in residential, commercial and industrial environments (e.g. in hospitals, shopping centres, airports, etc.); – stresses from chair castors according to EN 12529. Also suitable as transitional pressure-sensitive adhesive for bonding dimensionally stable floor coverings on impervious, non-absorbent substrates. Some application examples

Use Ultrabond Eco V4 Evolution for bonding:

• Homogeneous and heterogeneous PVC floor coverings, sheets and tiles
• CV and multilayer PVC floor coverings
• Rubber floorings (sheets and tiles, including multilayer floor coverings with acoustic or foam underlay)

Suitable also as a universal adhesive for:

• LVT (Luxury Vinyl Tiles)
• Modular LVT
• SPC, rigid-core and hybrid
• Semi-flexible vinyl floor tiles (VCT)
• Textile floor coverings with all common backings (latex-primed, PVC and polyurethane foam, natural jute and Action-Bac®, etc.)
• Needle-punch woven flooring
• Flocked textile flooring
• Linoleum with natural jute backing
• Polyurethane, polyolefin and synthetic back linoleum flooring
• Polyolefin-based and chlorine-free floor coverings (PO)
• PUR floor coverings (PU)
• PVC and rubber wall coverings
• Indoor sport floorings

Due to its particular formulation and extended open time, it can be used as wet-bed adhesive for all kind of floorings on absorbent substrates, as well as transitional pressure-sensitive adhesive for bonding dimensionally stable floor coverings on impervious, non absorbent substrates

TECHNICAL DATA:

• Consistency: creamy paste
• Colour: light beige
• Waiting time: 10-20 minutes (30-40 minutes on low/non-absorbent substrates)
• Open time: 60-70 minutes (up to 120 minutes on non-absorbent substrates)
• Set to light foot traffic: 3-5 hours
• Ready for service: 24-48 hours
• Coverage: 30-70m² per 14kg drum