BI2200 Building Inspection Moisture Meter

BI2200 Building Inspection Moisture Meter - Superseeded

The BI2200 inspection meter is ideal for building or home inspections and is designed to provide comparative, relative moisture content readings for common building materials that need inspection to identify problem or potential problem moisture areas in a home or building.

Materials to Measure

Stucco, plaster, drywall, tile, shingles, roofing, linoleum, wood and more.

Specific Applications

Specifically designed for the building or home inspector, the BI2200, using state-of-the-art electromagnetic wave technology, provides a non-invasive tool for measuring a wide range of materials including wood, synthetic stucco, plaster, drywall, insulation materials, ceramic tile, shingles, linoleum, concrete and more.

The BI2200 provides a general comparison moisture indication for inspection applications that only require relative* moisture content (MC) readings. By establishing a known baseline dry MC relative reading on a building material, the BI2200 can then compare and pinpoint elevated MC problem areas or conditions.

The BI2200 is programmable for numerous building materials and its two-button control makes one-handed operation simple. Designed with a Teflon pad to protect the sensor area on rough or abrasive surfaces, the BI2200 can provide a relative* MC reading on building materials without damage to the materials surface.

The BI2200, with its Press and Hold feature, lets you get into tight places without needing a visual line to the meter display. Beneath a sink, under a cabinet overhang or in a tight corner, with the Press and Hold feature you can take the relative* MC reading and the display holds the reading once the meter is removed, letting you quickly and easily document the readings during your inspection.

Easy to use and with a wide range of programmable building materials, the BI2200 is a reliable, state-of-the-art tool for the building or home inspection industry. *The BI2200 does not give precise MC percentages but is designed to provide a comparative relative MC reading for each material inspected in order to identify problem or potential problem areas in a building or a home.

Meter Specifications

Size & Weight:

Length – 4 9/16″; Width – 2 3/4″; Height – 1 1/16″; Weight – .37 lbs

Power:

9 volt battery

Auto Power Shut Down – 60 seconds

Control:

Two button control for on/off and material settings Press & Hold feature

Depth of Measurement:

3/4″

Moisture Content:

Relative 5% – 32%

Scanning Area:

1 1/2″ x 2 1/2″

Material Setting:

Selectable setting .20 – 1.0

Calibration:

Verifiable at factory

Other

1 Year Warranty

Battery Included

Shock Resistant

Carry Case with Belt Clip Included

Teflon® pad protects sensor plate from abrasive surfaces