Ardex WPM 368 Single Part Barrier Membrane
Ardex WPM 368 Single Part Barrier Membrane
ARDEX WPM 368, a single-component acrylic copolymer membrane, effectively safeguards against rising damp, efflorescence, and resists negative hydrostatic pressure. Its exceptional adhesion extends to various substrates such as brick, masonry, concrete block, and stone, making it easy to apply with a brush, roller, or airless spray machine.
WATWPM36820_19623
New product
Ardex WPM 368 Single Part Barrier Membrane
ARDEX WPM 368 is a single component acrylic copolymer membrane that will prevent rising damp, efflorescence and will resist negative hydrostatic pressure when used in accordance with the technical data sheet. It has excellent adhesion to most substrates including brick, masonry, concrete block, concrete, stone and is simple to use by brush, roller or airless spray machine.
ARDEX WPM 368 single part damp-proof is safe to use and can be over-coated using almost any decorative paint. ARDEX WPM 368 can be applied to damp surfaces and freshly laid hardened (green) concrete and conforms to the Building Code of Australia as a waterproof membrane.
SPECIFICATIONS:
Substrates:
- Brick, masonry, concrete block, concrete and stone.
Location:
- Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, lift wells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efflorescence producing concrete prior to overcoating with conventional building paints, ARDEX floor levellers and tile adhesives
Colours:
- Grey
Coverage:
- Water Stop – 45m² (1 coat)
- Moisture vapour barrier – 22.5m² (2 coats)
Pack Size:
- 20kg
Drying Times:
- Recoat time: 2-4 hrs
- Full cure: 3 days
You might also like
Ardex WPM 368 Single Part Barrier Membrane
ARDEX WPM 368, a single-component acrylic copolymer membrane, effectively safeguards against rising damp, efflorescence, and resists negative hydrostatic pressure. Its exceptional adhesion extends to various substrates such as brick, masonry, concrete block, and stone, making it easy to apply with a brush, roller, or airless spray machine.