Ardex WPM300 Waterproofing
search
  • Ardex WPM300 Waterproofing

Ardex WPM300 Waterproofing

Ardex WPM300 Waterproofing

Ardex WPM 300, a two-component water-based epoxy polyamide membrane, serves as a versatile barrier coating. Its application extends to damp surfaces, providing a waterproof membrane that resists hydrostatic pressure. Effectively preventing rising damp and the formation of efflorescence, it ensures robust waterproofing protection.

WATWPM300GR4_10207
New product
Available in
Available instore or CALL 1300 KEVMOR
  • All Products in Stock in Australia
  • Free Shipping for online orders over $100 Aust wide*

Ardex WPM300 Waterproofing

  • ARDEX WPM 300 is a two-component water-based epoxy polyamide membrane/ barrier coating.
  • Can be applied to damp surfaces
  • AS 4020:2000 Potable Water Approved
  • Hydrostatic pressure resistant waterproof membrane
  • Prevents rising damp and formation of efflorescence
  • Water-based – safe to use in sensitive locations
  • Green Star – meets the benchmark for VOC credit in the Green Building Council of Australia’s Rating Tools

Substrates:

  • Brick, masonry, concrete block, concrete, stone and timber

Location:

Low water vapour transmission coating and as a barrier/seal coating over freshly laid or damp concrete. Waterproofing barrier on the negative side in below grade surfaces such as basements, tunnels, lift wells, retaining walls and carparks. Waterproofing membrane or barrier coating over freshly laid hardened concrete, prior to the application of conventional levelling compounds carpet and tile adhesives. As a barrier seal coating over damp, green or efllorescence producing concrete prior to overcoating with conventional building paints

Colours:

  • Grey
  • Mojo Black

Coverage:

  • Water Stop – 60m² (1 coat)
  • Waterproof membrane – 30m² (2 coats) - using a 20L kit

Pack Size:

  • 4L
  • 20L

Drying Times: 

  • Min. Recoat time: 4 hrs 
  • Max. Recoat Time 72 hrs 
  • Full cure: 7 days

VOC content:

  • 26g/L

You might also like